Shopping cart
Products

AUDIO TECHNICA

 | 

MOVING COIL CARTRIDGES MONO

<< Previous



Audio Technica AT33MONO


Mono Low Output MC Cartridge





The AT33Mono is made specifically for use on mono systems. It has a horizontal coil, and so in principle only generates electricity horizontally. The AT33Mono produces sound to a very high quality because it does not easily pick up unnecessary strain components from distorted or scratched records, producing audio that you couldn't possibly get from a stereo cartridge. The AT33Mono also has appropriate compliance in the vertical direction, so will not cause damage to stereo records. Enjoy those well-known classic mono records of yesteryear with the AT33Mono.
- Mono cartridge compatible with stereo playback systems.
- Elliptical stylus chip and hard duralumin cantilever.
- 10O middle impedance specification.
- PCOCC coil prevents crystal gain boundary formation (in transmission direction).
- Strong body stabilized by a rigid body set-up.
- "Hanenite" anti-vibration rubber eliminates unnecessary vibrations.
- High-quality sound / Brass fastening screw.
*This model is not compatible with SP records.

Specifications
- Type: MC-type
- Playback frequency range: 20-20,000Hz
- Output voltage: 0.35mV (1kHz and 5cm/sec. horizontal signal)
- Horizontal/vertical output ratio: 30dB (1kHz)
- Output balance: 1.0dB (1kHz)
- Stylus pressure: 2.3-2.7g (2.5g standard)
- Coil impedance: 10O1kHz
- DC resistance: 10O
- Load resistance: More than 100O(when head amp connected)
- Coil impedance: 28µH (1kHz)
- Static compliance: 20×10-6cm/dyne
- Dynamic compliance: 6×10-6cm/dyne (100Hz)
- Needle shape: Round needle (0.65mil)
- Cantilever: Duralumin pipe
- Vertical tracking angle: 23°
- Dimensions: H16×W16.6×D26.5mm
- Weight: 6.9g
- Accessories: Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1




€ 329.00





Quantity