Shopping cart
Products

DENON

 | 

CARTRIDGES

<< Previous



Denon DL-A100


100th Anniversary Low output MC Cartridge



  


- Independent 2ch Moving Coils. The DP-A100 employs independent 2-channel moving coil cartridges to facilitate playback over a wide frequency range from low- to high-level signals. Superior playback performance is also possible due to the flat frequency response and minimal left-right sensitivity (level) differences.

- Fulcrum point of vibrating system that achieves stable tracking. The fulcrum point of the DP-A100’s vibrating system is made of extremely fine piano wire, and the tip of the stylus tracks smoothly in the groove of the record.

- Dual-structure cantilever. The DP-A100 uses a lightweight yet rigid dual-structure cantilever. Superior frequency response over the entire audible frequency range is achieved by minimising the mechanical impedance of the vibrating system.

- Long-lasting solid diamond stylus. Since the tip of the DP-A100’s stylus uses a solid diamond, stable characteristics with negligible friction are maintained for a long time. In fact, each diamond is individually fitted into the stylus so that the hardest section – where the diamond has crystallised – touches the wall of the groove.

- Cross-shaped iron core and coils, to minimise sensitivity differences between channels Wrapping separate coils on the cross-shaped iron core has successfully minimised sensitivity differences between the left and right channels while reducing mass.

- Characteristics chart packed with each product as a guarantee of superior performance Each individual DP-A100 has been carefully manufactured and packed with its own characteristics chart to guarantee superior performance.

Specifications
- Independent 2ch Moving Coils 
- Fulcrum point of vibrating system that achieves stable tracking 
- Dual-structure cantilever 
- Superior frequency response over the entire audible frequency range 
- Long-lasting solid diamond stylus 
- Cross-shaped iron core and coils, to minimise sensitivity differences between channels 
- Characteristics chart packed with each product as a guarantee of superior performance 
- Main Specifications 
- DL-A100  Principle Moving coil (MC) type 
- Output Voltage 0.3 mV (1 kHz, 50 mm/s horizontal direction) 
- Channel Balance 1 dB max. (1 kHz) 
- Channel Separation 25 dB min. (1 kHz) 
- Electrical Impedance 40 ohms ±20 % 
- Compliance 5 x 10-6 m/N (Using a 100 Hz record) 
- Stylus 0.2 mm square solid diamond 
- Tracking Force 25 mN ±3 mN (2.5 g ±0.3 g) 
- Frequency Response 20 Hz to 45 kHz 
- Weigh 8.8 g 




€ 599.00





Quantity