Dateq XTCII

Dateq XTCII

4+1 Channel DJ mixer with VCA controlled faders

Dateq XTCII
Dateq XTCII
Dateq XTCII
Dateq XTCII
1.299,00 Price include 21% VAT Price exclude VAT € 1.073,55
AVAILABILITY1 DAY
We have 1 last unit available, new factory boxed!

Create your own sound with Dateq’s new 4+1 channel Dance mixer
The XTC is a unique mixer developed in close consultation with a number of top DJs. The experience they built up in the dance scene led to the implementation of several important requirements, which formed the basis for the development of this mixer. The XTC II is a 4 + 1 channel mixer with inputs for nine stereo sources and a microphone. The FX-Send and Return function allows you to feed a signal through an effects processor and assign it to each individual channel. This advanced DJ mixer provides skilled DJs with creative challenges. A pure compact mixer, functional and rock solid. The XTC II has four 60-mm VCA controlled fader channels and a separate microphone and line channel. Ten inputs (three phono inputs, six line inputs and a separate microphone input) provide flexibility and make source replugging a thing of the past. With the very effective 3-band equalizer it is easy to make any adjustments you have in mind. The EQ system enables level control within a -32db to +8db range for fine-tuning high, mid and low bands. The vocally adapted 3-Band equalizer on the first microphoneline channel enables level control within a -15 to +15 dB range for high, mid and low bands. The crossfader can be easily assigned to each of the four input channels. The crossfader is VCA controlled to prevent equipment failure. Fader curve adjust enables you to stageless modify the cross fader curve. From soft ‘House’ to hard ‘Scratch’. The crossfader can be easily assigned to each of the four input channels. The crossfader is VCA controlled to prevent equipment failure. Fader curve adjust enables you to stageless modify the cross fader curve. From soft ‘House’ to hard ‘Scratch’. Each channel has cue facilities with Dateq ‘split’ system, allowing you to simultaneously monitor both the cue signal and the master channel on your headphones. A large VU meter gives an exact overview of the cue level indicating both the cue signal and the effect send & return signal preventing overload distortion. A software-controlled limiter on the output ensures flawless output control and prevents overload distortion. Mmaster The XTC II is equipped with all the outputs you need. Both Master and Monitor have balanced XLR connections as well as stereo Chinch connections. The XTC II also features a record-out and an output for sub-low speakers. The XTC II has two 6.3 mm headphone jacks.


Specifications

Microphone channel
- MIC Input: XLR-3 female; balanced
- Signal level: -50dB @ 600 ohm
- Impedance: 3kOhm
- Input noise: <-108dB
- Headroom: +36dB
- Phantom voltage: 15V
- LINE Input: Cinch
- Signal level: 0dB
- Impedance: 22kOhm
- Input noise: <-80dB

Other channels
- Line/ line 1/ line 2: Cinch
- Signal level: 0dB
- Impedance: 22kOhm
- Input noise: <-80dB
- Phono: Cinch
- Signal level: -42dB
- Impedance: 47kOhm/ 25pF
- Input noise: <-80dB

Master
- MASTER/ MONITOR/ RECORD/ AUX/ EFFECT SEND: Cinch
- Signal level: 0dB
- Impedance: 330ohm
- MASTER/ MONITOR: XLR-3 male; balanced
- Signal level: +6dB
- Impedance: 330Ohm
- Input noise: <-80dB
- EFFECT RETURN
- Signal level: 0dB
- Impedance: 22kOhm
- Input noise: <-80dB

Tone control
- MICROPHONE CHANNE: three-way tone control
- LOW: +/- 15dB @ 150Hz
- MID: +/- 15dB @ 1kHz
- HIGH: +/- 15dB @ 6kHz
- FADER CHANNEL: three-way tone control
- LOW: -32/ +8dB @ 50Hz
- MID: -32/ +8dB @ 1kHz
- HIGH: -32/ +8dB @ 12kHz

Frequency response
- Microphone to master: 20Hz – 20kHz @ -3dB
- Faderchannels to master: 5Hz – 40kHz @ -3dB

Distortion
- THD+N: 0.05% IEC-A nominal operation
- IMD: 0.08%
- CROSSTALK: >75dB @ 1kHz
- NOISE: -80dB

Common
- Power supply: 100 – 250Vac/ 50 - 60Hz
- Power consumption: 25W
- Lamp connector: 12Vdc/ 3W
- Front: 320x354mm
- Height: 8HE
- Depth: 92mm
- Weight: 4.5kg

Bracket
-19 Inch mount assembly for the XTC-II mixer included

>

AMPLIFIERS