NUPRiME Omnia SW-8 & LPS-205

NUPRiME Omnia SW-8 & LPS-205

High-end 8-port gigabit Ethernet Network Switch & Power Supply

NUPRiME Omnia SW-8 & LPS-205
NUPRiME Omnia SW-8 & LPS-205
NUPRiME Omnia SW-8 & LPS-205
NUPRiME Omnia SW-8 & LPS-205
NUPRiME Omnia SW-8 & LPS-205
NUPRiME Omnia SW-8 & LPS-205
NUPRiME Omnia SW-8 & LPS-205
NUPRiME Omnia SW-8 & LPS-205
NUPRiME Omnia SW-8 & LPS-205
€ 1.054,00 865,00 Price include 21% VAT Price exclude VAT € 714,88
Omnia SW-8 Switch
The Omnia SW-8 is a high-end 8-port gigabit Ethernet Network Switch that improves the network performance by reducing signal noise. Errors in the network cause data packets to be resent and degrade network performance. By reducing circuit and power supply noise, and using a customized TCXO clock, Omnia SW-8 delivers accurate network signal that ensures stable music data transmission. The sound quality of a high-end audio system with a connected ethernet cable is also slightly improved when we reduce ethernet signal noise. NuPrime licenses Omnia SW-8 from Thunder Data Co. Ltd., maker of Bonn N8. Omnia SW-8 differs from Bonn N8 with an upgraded low noise power supply and aluminum chassis.

- Eight AUDIO GRADE 100 / 1000 Base-T Gigabit Ethernet Ports
- Superior main clock accuracy
- Customized Silent Angel Noise Absorber (SANA)
- Two noise isolator for main power circuit
- Two noise isolator for clock generator circuit
- Medical Grade power adaptor

Precise Control Of Clock Signal- TCXO (Temperature Compensation crystal Oscillator)
The heart of Omnia SW-8 is a customized TCXO with an extreme accuracy of 0.1ppm, much higher than a standard TCXO. The result is a more accurate network signal and stable music data transmission.

Main Circuit Board
- Two electrical noise isolation circuits, with noise rejection rate 17dB, for power circuit.
- Two electrical noise isolation circuits, with noise rejection rate 20dB, for clock generation circuit.
- This noise isolation circuit ensures Omnia SW-8 to generate stable network signals.

High Permeability EMI Absorber
The Omnia SW-8 utilizes EMI absorber at the inner side of the bottom case to further reduce circuit noise.

Result In Jitter Improvement
The quality of network signal from Omnia SW-8 is 90% better than that of a general switch in jitter measurements.

Recommended Setup
For best performance, connect Omnia SW-8 to the router and all network audio components to Omnia SW-8.

- Interface: 8 x Audio Grade 100 / 1000 Base-T
- LED: 1 x Power LED (Green), 1 x Alarm LED (Red), 8 x Port Status LEDs (Link / Activity)
- Main Clock Accuracy: 0.1 ppm at 25 °C
- EMI Absorber: Silent Angel Noise Absorber (SANA)
- Noise Isolator: Main Power Circuit: 17.78 dB @ 100MHz x2, Clock Gen. Circuit: 20.79 dB @ 100MHz x2
- Medical Grade Power Supply
- Aluminum case
- External Power: 5VDC at 1A Max. 5W. The power adaptor meets 2 X MOPP isolation regulation, which is highest level in medical grade, and has ultra low leakage current (<100μA)
- Product Dimension: 154.5mm x 85mm x 26mm
- Weight: 1.2 Kg (Gross Weight)
- Temperature: Operating 0 ~ 35 °C, Storage -20 ~ 70 °C
- Humidity:Operating: 10% ~ 90% RH (non-condensing), Storage: 5% ~ 95% RH (non-condensing)

LPS-205 Linear Power Supply
Low power devices such as DAC, streamer, CD player, media server, and digital music player are susceptible to AC noise from switching mode power adapter. However, not any linear power supply will suffice as a replacement for the switching mode power supply. NuPrime LPS-205 linear power supply incorporated a fully balanced El-frame transformer architecture design that is less susceptibility to core saturation from DC offset.

The following features make LPS-205 a Hi-Fi power supply with clean and stable output power designed for audiophiles:
- Low noise MOSFET
- EMI filter
- Soft start & fanless design
- Full transformer epoxy resin package to avoid vibration interference
- Low dropout linear output
- Overvoltage protection
- Overcurrent protection
- Over-temperature protection
- Lightning protection
- Large capacitance output higher than 35,000 uF)

- DC To DC cable X 2
- Power cable X 1
- USB-C cable X 1

- LED status display for Standby, In-Use, and Protection state
- Input: 230VAC or 115VAC 50/60Hz (with voltage selector)
- Output: Two sets of DC 5V/2A isolated and independent outputs (Zone 1 & Zone 2)
- Output connectors: Two sets of 5.5 X 2.1 female socket and two sets of USB-A female socket
- Total power 28W
- Product Dimension: 155 mm (W) X 115 mm (L) X 58 mm (H)
- Weight: 1.3 KG
- Package Dimension: 250 mm (W) X 220 mm (L) X 120 mm (H)
- Package Weight: 2.5 KG

Note: If you have two different devices that need 2A current, connect them to two different group as shown in the back panel for USB-A and 5.5×2.1 connectors.