Dateq Apollo

Channel mixing console 14 inputs 7 channels

DISCONTINUED

AVAILABILITY: N/A

A giant leap for mankind

Apollo, the handsome young Greek god of prophecy, gifted musician and protector of young men, has come down to Earth on an important new mission. Transformed into a very complete mixer, his task is to make life easy for a new generation of DJs. The Apollo has lots of intesting features like the beatcompare circuit and the transform buttons. Let’s get into the groove! The apollo also has an effect return input and external reverberation can easily be mixed directly onto the master. 14 inputs 7 channelsThe Apollo has 7 channels, each with 2 inputs. A total of 2 microphones, 3 turntables and 9 line signals (CD or MD players, sampler, groovebox, keyboard etc.) can be connected up to the mixer panel. In addition, each channel has a 3-way (A-Master-B) switch, allowing each channel to be linked to the A or B side of the crossfader or directly to the master. The Apollo’s crossfader is VCA driven. This means that no audio signals pass through the fader, just control voltages. Thanks to this, the life of the fader is dramatically increased and problems such as noise and loss of sound are things of the past. The Apollo is also provided with the “transform” buttons. When one of these buttons is pushed in, the signal from the crossfader becomes visible. It disappears again when the button is released … an extra tool for the creative DJ. The built-in beatcompare circuit, incorporating advanced microprocessor technology, is absolutely unique. It allows the beats from 2 signals to be displayed side by side on the crossfader. show clearly whether the pitch of the source to be adjusted has to be raised or lowered to achieve equality. The beats can now be superimposed. This function makes seamless crossover a piece of cake. The Apollo has gain control and 3-band equalizer in each channel. The cue function allows you to listen to the audio signal of each channel before you release it, while the split function gives you the cue signal and the master signal simultaneously over the headphones. The “sub low” output allows you to amplify frequencies under 125 Hz separately. The master output has both XLR-balanced and cinch connections, and the monitor output can be adjusted separately. An extra feature provided on the Apollo is the effect return input, which allows external reverberation to be mixed directly on to the master. The effect sends feature permits similar introduction of reverberation in the microphone inputs with the aid of jumpers on the pre- or post-fader.

Specifications

- MONO INPUT

- MIC (channel 1 and 2) XLR-3 female, electronically balanced

- Signal level -54 dB @ 600 ohm variable

- Impedance3 kohm nominal

- Input noise <-107 dB (IHF-A)

- Headroom +20 dB

STEREO INPUTS

- PHONO (channel 3, 4 and 5) Cinch

- Signal level -42 dB @ 47 kohm variable

- Input impedance 47 kohm/ 25pF nominal

- Input noise > -80 dB (IHF-A)

- Channel separation > 65 dB @ 1 kHz

- LINE (channel 17) / EFFECT RETURN Cinch

- Signal level -14 dB @ 600 ohm variable

- Input impedance 22 kohm nominal

- Input noise > -80 dB (IHF-A)

- Channel separation > 65 dB @ 1 kHz

TONE CONTROL

- EQUALISER MIC

- High 10 kHz ±15 dB, Shelving

- Mid 1400 Hz ±12 dB, Bell

- Low80 Hz ±15 dB, Shelving

- EQUALISER LINE

- High 12 kHz ±15 dB, Shelving

- Mid 1400 Hz ±12 dB, Bell

- Low50 Hz ±15 dB, Shelving

OUTPUTS

- BALANCED MASTER (XLR) +6 dB balanced/ 600 ohm/ variable

- MASTER OUT / MONITOR (Cinch) 0 dB unbalanced/ 600 ohm/ variable

- RECORDER (Cinch) 0 dB unbalanced/ 600 ohm/ fixed level

- MONO SUB (6,3 mm TRS Jack) 0 dB unbalanced/ 600 ohm/ < 125 Hz

- LIGHTSHOW (6,3 mm TRS Jack) 0 dB unbalanced/ 10 kohm/ transformer isolated

- MONO EFFECT SEND 1 / 2 (Cinch) 0 dB unbalanced/ 600 ohm/ pre- or postfader

- PHONES (6,3 mm TRS Jack) 0,3 W @ 4 ohm/ Impedance 432 ohm

FREQUENCY RESPONSE

- MIC TO MASTER 80 Hz25 kHz -1 dB

- ALL OTHER INPUTS TO MASTER 20 Hz25 kHz -1 dB

- THD + N 0,05 % nominal (CCIR-RMS)

GENERAL

- POWER SUPPLY

- Mains voltage 220240 VAC / 50 Hz

- Power consumption20 W

- Lamp connectionBNC 12 VDC / 3 W

SIZE AND WEIGHT

- Front 483 x 355 mm (W x H) = 19”, 8HE

- Cutout 448 x 337 mm (W x H)

- Depth115 mm

- Weight 6,0 kg Net

>

AMPLIFIERS

	Quantity	Article	Starting price	After that	Period	Total
	Quantity	Article	Unit price	Total
		Quantity:	(Gift)

	Subtotal



	Total
*Prices include 21% VAT		*Prices are exclusive of VAT
Total weight

Shopping cart

PRODUCT BRANDS

Search

Dateq Apollo

Channel mixing console 14 inputs 7 channels

>