Audio Technica AT-LP3

Audio Technica AT-LP3

Fully Automatic Belt-Drive Stereo Turntable

Audio Technica AT-LP3
Audio Technica AT-LP3
Audio Technica AT-LP3
Audio Technica AT-LP3
299,00 Price include 21% VAT Price exclude VAT € 247,11
Advanced Fully-Automatic Belt-Drive Turntable

A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Balanced straight tonearm with hydraulically damped lift control and lockable rest
- Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
- Switchable modes for moving magnet and moving coil cartridges
- AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
- Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
- Damped base construction for reduced low-frequency feedback colouration

Specifications Turntable
- Type: Fully Automatic, Belt-Drive
- Motor: DC motor
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable Platter: Die-cast aluminium
- Wow and Flutter: Less than 0.2% WRMS (33 1/3 RPM) at3kHz
- Signal-to-Noise Ratio: > 60 dB
- Output Level: “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec, “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
- Phono Pre-Amp Gain: 36dB nominal, RIAA equalised, 56dB nominal, RIAA equalised
- Power Supply Requirements: 220 to 240 V / 50, 60 Hz
- Power Consumption: 2W
- Dimensions: 435 mm ×353 mm×128 mm (W×D×H)
- Weight: 5.2kg
- Accessories Included: Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable

Specifications Cartridge & Stylus
- Model        AT91R
- Type: VM Dual Magnet
- Output Voltage: 3.5mV (mV at 1kHz, 5 cm/sec)
- Vertical Tracking Force Range: 1.5 to 2.5g (standard 2.0g)
- Stylus Construction: 0.6 mil bonded conical
- Cantilever: Aluminium pipe
- Recommended Load Impedance: 47,000 ohms
- Weight: 5.0g

Specifications Headshell
- Model        AT-HS3
- Weight: 11.1g
- Overhang Adjustment: 8mm

Specifications Tone arm
- Type: Static balanced straight shaped with soft damping control
- Effective Length: 221.5mm
- Overhang: 19mm
- Maximum Tracking Error Angle: Less than 3°
- Stylus Pressure Adjustment Range: 1 to 4g
- Applicable Cartridge Weight: 14.5 to 20g
- Anti-skating Range: 0 - 3 g