Shopping cart


<< Previous - Next >>

HiFi-Tuning Gold² Audio Grade Fuses

HiFi-Tuning Gold² Audio Grade Fuses

6,35x32mm (American model fuse) The best fuses for all your audio & video equipment

If you order fuses please write done the values you need in the "comments" text window.(shopping cart page 3)

- Great benefits for a small investment
- Greatly reduced losses
- Handmade in Germany
- Individually tested
- Only the very best materials are used
- Fuse wire made from pure silver
- Ceramic body with special filler
- 24 Carat gold plated, pure silver end caps 
- Cryogen treated 
- Demagnetized 
- Available in all usual sizes and current ratings 
- Available in fast-acting as well as time-delay fuse

Certainly, the fuses inside your audio & video equipment are amongst the most underestimated components. These very cheap components have, in the first place, to carry all current that is withdrawn from the mains. Under most circumstances, much money was invested already in expensive to very expensive powercords. No further comments will be necessary to explain, that these crappy fuses will be a bottleneck in your system. Relatively big enhancements can be achieved with little effort when replacing the stock fuses with fuses that are designed specifically for audio-/video systems. Ordinary fuses consist of a glass tube, with on either end small steel caps with a layer of nickel over it. Neither of these parts are ideal: the ideal fuse for audiohas to start with a ceramic body, in whcih should be mounted a silver fuse wire. This wire is connected to end caps made from pure silver, that was covered with copper first, then gold plated.To top things off, all fuses are then demagnetized and cryogen treated for even better conductivity, and less distortion and noise. For the HiFi-enthusiast, there's no denying of the fact, that a clean and constant power delivery can improve the performance of a HiFi system dramatically. However, the importance of audio grade fuses has always been neglected. One would expect to have the biggest gain in performance with equipment, that draws heavy currents, for example a power amplifier. However, the results from our listening-sessions proved, that even equipment with small power consumption (for example a phono-preamp) exhibits a remarkable gain in performance. Fuses always carry a high current that easily evokes metal fatigue. This causes a degradation of the conducting properties of the fuse-wire, thuis resulting in a degradation of the equipment in which this fuse was mounted. The HiFi Tuning fuses will have up to 90% less losses than prescribed by the IEC. The HiFi-Tuning fuses are 24 carat gold plated. They are each handmade in Germany, precisely measured and tested, to give you the best from your equipment. On one hand, many fuses contain a spiralised fuse wire, that causes a high resistance and inductance. On the other hand, we have the HiFi-Tuning fuses that contain a straight fuse wire made from pure silver. This results in a very low resistance and a negligible inductance. The HiFi-Tuning fuses are available in all usual current ratings, in fast-acting or as a time-delay fuse. Two wide spread sizes are available, the European 5 X 20mm (3/4" X 1/5") and the American 6,3 X 32mm (1 1/4" X 1/4").
In the following table you can see all available values:

- US Gold² fast-acting, 6.35 X 32 mm: 250 mA, 315 mA, 400 mA, 500 mA, 630 mA, 800 mA, 1 A, 1.25 A, 1.6 A, 2 A, 2.5 A, 3 A, 3.15 A, 4 A, 5 A, 6 A, 6.3 A, 7 A, 8 A, 10 A, 12 A, 12.5 A, 15 A, 16 A, 20 A.
- US Gold² time-delayed, 6.35 X 32 mm: 250 mA, 315 mA, 400 mA, 500 mA, 630 mA, 800 mA, 1 A, 1.25 A, 1.6 A, 2 A, 2.5 A, 3 A, 3.15 A, 4 A, 5 A, 6 A, 6.3 A, 7 A, 8 A, 10 A, 12 A, 12.5 A, 15 A, 16 A, 20 A.

After this upgrade, you will notice a tighter low-end, that seems to go deeper, more detail, and an alltogether cleaner sound.
Watch out for fuses that look similar, but in fact are ordinary fuses with copper-clad endcaps, from which is claimed they should consist of pure copper.

€ 32.00