Shopping cart
Products

KRELL

 | 

PREAMPLIFIERS STEREO

Next >>



Krell Illusion II


Stereo Preamplifier



  

Specifications 
- Analog Inputs: 2 pr. balanced via XLR connectors 3 pr. singleended via RCA connectors
- Digital Inputs: 1 AES/EBU via XLR connector 2 coaxial via RCA connectors 2 optical via Toslink connectors
- Main outputs: 1 balanced via XLR connectors 1 pr. single]ended via RCA connectors
- Headphone output: 1 via 3-conductor 6.35 mm (1/4 inch) connector 
- Control inputs: 1 RS-232 input via a 9-pin D-subminiature connector 1 remote IR detector input via a 3-conductor 3.5 mm connector 1 12 VDC trigger input via 2-conductor 3.5 mm connector
- Control outputs: 2 individually programmable 12 VDC trigger outputs via 2-conductor 3.5mm connectors (30 mA maximum per output)
- Input impedance: Balanced: 40kΩ Single: Ended 20kΩ
- Output impedance: Balanced: 310 Ω Single-ended: 155 Ω Headphone: <3.0Ω
- Gain: Balanced: 12.0 dB 6 dB (single-ended output) Singleended: 6.0 dB Headphone: 5.1 dB with 32 Ω load
- Volume control: Current mode, 12-bit, discrete R-2R ladder
- Input overload: > 7.0 V RMS balanced or single-ended
- Output overload: Balanced: >16 V RMS Single-ended: >8.0 V RMS Headphone: >3.0 V RMS, 32 Ω load
- Frequency response: 20 Hz to 20 kHz +0, -0.02 dB 0.25 Hz to 1.2 MHz +0, -3 dB
- Total harmonic distortion plus noise: Balanced Output: <0.003%, 20 Hz to 20 kHz, at 4.0 V RMS Headphone: <0.09%, 20 Hz to 20 kHz, 2.0 V RMS, 32 Ω load
- Signal-to-noise ratio •100 dB wideband, unweighted: 107 dB "A"-weighted, both referred to 4.0 V RMS balanced
- Power consumption: Standby: <2 Watts Power on: 40 Watts
- Dimensions: Preamplifier only: •17.3 in.W x 3.8 in. H x 18.3 in. D 43.8 em W x 9.7 em H x 46.4 em D
- Weight •Shipped: 38 lbs., 17.2 kg : Preamplifier only: 23 lbs., 10.4 kg
 
 
 

 
 





€ 8800.00






Quantity